您好,  [请登录] [QQ登录]  [支付宝登录]  [免费注册]
购物车中有 件商品

商品分类

分享到： 百度搜藏 搜狐微博 新浪微博 腾讯微博 QQ收藏 人人网 Facebook Twitter
您当前的位置： 首页 » 米尔ATMEL/NXP开发板 »
MYD-LPC1850开发板NXP LPC1850FET256 Cortex-M3 LPC1800开发板
 
MYD-LPC1850开发板NXP LPC1850FET256 Cortex-M3 LPC1800开发板
 
查看大图

分享到： 转播到腾讯微博

MYD-LPC1850开发板NXP LPC1850FET256 Cortex-M3 LPC1800开发板

  • 商品编号：BN-168E84F0
  • 货　　号：BN-168E84F0
  • 销售价： ￥1000.00
购买数量：
  (库存878)
概述

MYD-LPC1800是米尔科技Z新推出的一款基于NXP LPC1850FET256 Cortex-M3的全功能开发板。

MYD-LPC1800工作主频为180MHZ，片内200KB SRAM,64KB ROM,板上扩展SD卡接口，USB Host/Device,4.3’’ TFT LCD，ADC变阻, CAN, JTAG调试接口，用户按键等等，它的丰富的内存和外设资源让用户更加方便深入的评估测试LPC1800的每一个功能，有效的缩短了产品研发的周期。


关键字：MYD-LPC1800开发板，LPC1800评估板，LPC1800 ARM Cortex-M3， LPC1800开发板，NXP LPC1800,NXP LPC1850,LPC1850 开发板，LPC1850 评估板


硬件资源列表

Item Description
Size Development board size:115mmx90mm
CPU LPC1850FET256 (Cortex-M3 Core), Up to 180MHz
Memory On-chip: 200KB SRAM, 64KB ROM External : 32MB SDRAM, 2MB NORFLASH, 4MB SPI FLASH
Debug 20 Pin,2.54mmJTAG debug interface
Peripheral Type Quantity Description
RS485 1 Support RS485
Ethernet 1 100Mbps, DP83848
CAN 2 Support CAN
USB 2 Support USB HOST/Device 2.0 USB OTG 2.0
Audio 2 Audio in/out
SD interface 1 SD/MMC interface
Extension 3 Extension for customer
JTAG 1 Standard 20 pin JTAG interface
LCD interface 1 Support 4.3 inch touch screen
Button User button 4 K1,K2,K3,K4
Reset 1 SW1
Power 5V/2A

MDK 资源列表

Peripheral Example Description
ADC ADC_DMA Shows how to use ADC conversion and transfer converted data by using DMA
Adc_interrupt Shows how to use ADC conversion in interrupt mode
CAN Can_test Shows how to use CAN driver functions for sending and transmitting data to a Can Analyser
EMAC Emac_test Shows how to implement an simple ethenet application
EMC Emc_Norflash Shows how to work with NorFlash (if available) by using EMC component of LPC18xx
Emc_Sdram Shows how to work with SDRAM (if available) by using EMC component of LPC18xx
GPIO Gpio_input Describes how to configure GPIO to read the state of a particular pin
Gpio_ledBlinky Set ON/OFF for the GPIO pins to drive LEDs
I2C I2c_TouchLed Configures I2C as master, reads the touch buttons, and displays the result on the LEDs
LCD Lcd_Demo Shows how to interact with LogicPD 4.3 LCD
RTC Rtc_Alarm Shows the configurations to generate interrupt in Second Counter Increment Interrupt (1s) and generate Alarm interrupt at 10s
TIMER Timer_Capture Shows how to use Capture Timer function.
UART Uart_232 Test Uart RS232 functionality
Uart_rs485 Shows how to configure UART for RS485 functionality
USB Usb_MassStorage Is a simple USB Mass Storage application on LPC18xx
Usb_Cdc Describes how to configure USB Device of as a virtual COM port
Usb_Hid Shows how to use usb rom driver to make a simple HID device
WDT Wdt_interrupt Shows how to use WDT to generate interrupt after a specific time

配置清单

编号 描述 数量
1 MYD-LPC1850开发板 1
2 DVD产品光盘 1
3 9Pin to 9Pin串口线 1
4 Micro USB线 1
5 网线 1
如果您对本商品有什么问题,请直接到 http://www.broadon.cn 咨询在线客服! 更新和价格也请到http://www.broadon.cn
如果您对本商品有什么评价或经验,欢迎分享!